Finned tubes are elongated aluminium cladded carbon steel flat tubes with brazed aluminium fins. Common applications of the shell and tube heat exchanger are within oil, gas and chemical industries. Elfin finned crustclub tubes have found takers and wide-scale usage in hydropower generator coolers. In an Elfin tube, the fin strip is mechanically forced on the outer side to ensure adhesion of the fin to the heat exchanger tube.
Shell and fin tube type heat exchanger majorlly design under temperature range from “sub zero to 350 Deg C temp” for cooling large volume of air or process gas. Shell and fin tube type heat exchangers are compile under various product range having compact size compare to normal heat exchanger. To increase heat transfer capabilities, fin tube pipes can either have fins that are applied as a second material , or raised out of the material of the tube itself (such aslow fin,medium-high fin, andhigh finned tubes). Our company was formed as Spiro-Gills Ltd in 1945 to manufacture finned tubing and finned tube heat exchangers.
The tube and fins are both manufacturer from steel and can withstand high temperatures for extended periods of time. We can produce welded fin tube from steel or stainless steel and in a wide range of dimensions and fin sizes with serrated and non-serrated fins. The heart of the air-cooled heat exchanger is the extended surface tube – the section where heat is transferred. This surface is composed of helical high finned tubes, which need to be replaced from time to time due to corrosion, fouling or damage – either to the fins or to the base material. The profile of the fins has significant effect of the performance of a finned tube heat exchanger. It is important to ensure each fin has a tight connection on the tube surface to provide maximum thermal conductivity.
However, the ‘G’ type fin can withstand temperatures of up to 400°C and can incorporate carbon steel fins for better conductivity. Tube Bundle Heat Exchangers are often baffles directing flow through the shell side so the fluid does not take a short cut through the shell side leaving ineffective low flow volumes. Tube Bundle Heat Exchangers companies however do not use single pass heat exchangers because they can break easily in addition to being more expensive to build. Tube Bundle Heat Exchangers multiple heat exchangers can be used to simulate the counter current flow of a single large exchanger.where a floating tube bundle where the tube plates are not welded to the outer shell is available. The integrally finned tube offers a longer life than other types of finned tubes with no possibility of the fins loosening, no loss of heat …
Multiple types and shapes of finned tubes exist including round tubes, oval tubes, or flat tubes. Flat tubes, made of aluminium clad carbon steel tubes with aluminium brazed fins, so-called SRC©, are the state of the art for power plant air cooled condensers. Plate finned type Heat Exchanger of flexibility is present in plate-fin heat exchanger design as they can operate with any combination of gas, liquid, and two-phase fluids. These are precious materials with an inherent value based on fair market prices. Copper fin pipe will generally cost more than aluminum, but it maintains the best heat transfer among common alloys. Copper’s chemical properties are ideal for many heat exchanger applications — it’s easily formed and can be readily enhanced for heat exchanges.